Gtechniq G1 + G2 - ClearVision Smart Glass Coating 15ml/100ml

OPTIMUM VISIBILITY - HYDROPHOBIC GLASS PROTECTANT

Gtechniq G1 ClearVision Smart Glass Coating has excellent durability and exceptionally low smear characteristics that make it ideal for car windscreens.

Please note that with glass coatings there is a trade off between durability and functionality. Whilst G1 is recommended for car windscreens, for surfaces such as shower screens, or marine glass where maximum repellency is required, it is better to use G5 Water Repellent Coating for Glass and Perspex.

Please also note that G1 will only work on glass substrates so, for example, it will not work on modern headlight lenses which are made from polycarbonate. For these you will need to use G5 Water Repellent for Glass and Perspex.

Directions

• Wear gloves and do not apply in direct sunlight
• Clean all glass you are going to protect
• For best results machine polish the glass with G4 Nano Glass Polish and a medium pad. Or alternatively, polish the glass with G4 Nano Glass Polish and a hand polishing pad. Apply a small amount and polish in a circular motion
• Clean the glass back to a shine with a glass cleaner
• Shake bottle well before use
• For windscreens we recommend using 3 layers of G1, but for side and rear screens only 1 layer is needed
• Apply a liberal amount of G1 to an AP1 Lint-Free Applicator Pad
• Work product into the glass in a circular motion covering all of the glass, and leave to cure for 5 minutes
• Using a new AP1 apply the same amount of product to the pad, but this time put G1 over your previous layer in a side to side motion, leave for a further 5 minutes to cure
• Apply your third layer with the same amount of product on an AP1, however this time apply in vertical straight lines, leave to cure for 15 minutes
• Remove cured residue, with G2 Residue Remover. Dab the G2 onto the remaining applicator and apply to a small area at a time, then buff the glass immediately with an MF1 cloth
• Finish by cleaning the wiper blades and glass with a glass cleaner
• We recommend you apply a layer of G1 on your wiper blades without removing residue. If wiper blades are worn they should be replaced
• Do not expose your car to the elements for at least 3 hours
• There may be some wiper blade judder, in 90% of cases this will disappear within two weeks
• Store in a cool, dry place
• Use product within 3 months of opening